Address Resolution Protocol
Subject: Computer and Technology noun /ˈæd.rɛs ˌrɛz.əˈluː.ʃən ˈproʊ.tə.kɑːl/ 1 definition
- computer-networking
- network-protocols
- data-link-layer
- local-area-networks
-
Definition (noun)
Entry #17 · UpdatedThe Address Resolution Protocol (ARP) is a foundational communication protocol standardized in RFC 826 that translates a network-layer address—most commonly an IPv4 address—into its corresponding data-link-layer hardware address, such as an Ethernet Media Access Control (MAC) address. When a host needs to deliver a frame on a local area network (LAN) and lacks an entry in its local ARP cache, it broadcasts an ARP request asking which device owns the target IP address, and the matching host responds with a unicast ARP reply containing its MAC address. Operating strictly within the boundary of a single Layer 2 broadcast domain, ARP resolves only local next-hop neighbors or the default gateway for remote traffic and is superseded in IPv6 networks by the ICMPv6 Neighbor Discovery Protocol (NDP).
Common Forms
Proxy ARP: A technique in which a router or gateway answers ARP requests on behalf of hosts on another network segment, replying with its own MAC address so packets can be routed without modifying host routing tables.
Gratuitous ARP (GARP): An unsolicited ARP broadcast sent by a device for its own IP address to detect duplicate address conflicts on a subnet or to refresh neighboring ARP caches and switch forwarding tables after a failover.
Reverse ARP (RARP): An early protocol variant that allowed diskless workstations to query a local server for their own IPv4 address using their hardware MAC address, now superseded by Dynamic Host Configuration Protocol (DHCP).
Inverse ARP (InARP): An extension used primarily in Frame Relay and Asynchronous Transfer Mode (ATM) networks to resolve a remote peer's Layer 3 protocol address from an existing Layer 2 virtual circuit identifier.
Example
When a workstation at
192.168.1.15attempts to open an SSH session to a local file server at192.168.1.50and finds no matching entry in its ARP cache, it transmits a Layer 2 broadcast frame (FF:FF:FF:FF:FF:FF) asking which host owns192.168.1.50. The file server recognizes its IPv4 address and sends back a unicast ARP reply containing its MAC address02:1A:2B:3C:4D:5E, enabling the workstation to cache the mapping and encapsulate subsequent packets into Ethernet frames.