Skip to main content
Definition Website Computer and Technology

Static Random-Access Memory

Subject: Computer and Technology noun /ˈstæt.ɪk ˈræn.dəm ˌæk.sɛs ˈmɛm.ə.ri/ 1 definition

  1. Definition (noun)

    Entry #221 · Updated

    Static Random-Access Memory (SRAM) is a type of volatile semiconductor memory that stores each bit in a bistable latching circuit—most commonly a six-transistor (6T) cell built around two cross-coupled inverters—rather than a charge-storing capacitor. Because the latch holds its logic state continuously while power is supplied, SRAM avoids the periodic refresh cycles required by dynamic RAM (DRAM), enabling fast, deterministic access with simpler control timing. Its multi-transistor cell footprint results in lower storage density and higher silicon cost per bit than DRAM, confining SRAM primarily to speed-critical or low-power roles such as processor caches, register files, and on-chip scratchpad buffers rather than bulk system memory.

    Common Types

    • Asynchronous SRAM: Operates without a system clock, latching addresses and transferring data directly on control-signal transitions such as chip enable, output enable, and write enable in embedded controllers and industrial equipment.

    • Synchronous SRAM: Aligns all address, data, and control inputs to a shared clock edge—often adding pipelined burst transfers or zero-bus-turnaround interfaces—to sustain high bandwidth in network switches and external caches.

    • Multi-Port SRAM: Exposes two or more independent read and write ports to the same memory array, allowing multiple processor cores, DMA engines, or execution pipelines to access shared data concurrently without bus contention.

    • Non-Volatile SRAM (nvSRAM): Pairs volatile SRAM bit cells with integrated non-volatile storage elements—such as SONOS charge-trap or ferroelectric cells—to preserve stored data across power loss while maintaining SRAM speeds during normal operation.

    Example

    A modern processor core implements its 32 KiB Level 1 data cache using on-die 6T SRAM so load instructions can retrieve active variables in about four clock cycles with no refresh overhead. Bulk application data instead resides in 32 GiB of external DDR5 DRAM, trading higher access latency and periodic refresh cycles for far greater storage density and lower cost per gigabyte.